Advanced Chemical Solutions understands the challenge of lube oil leakage from the head stock system into the cutting oil, it's this intermingling of oils that can lead to premature tool failure, staining of metals, excessive smoking and an overall degeneration of your cutting oil.
Advanced Chemical Solutions has formulated their multi spindle dual purpose oil to eliminate these issues. The use of our dual purpose oil as both lube oil and cutting oil assures excellent machinability while minimizing the likelihood of staining on the sensitive metals used in gear and hydraulic systems.
After extensive testing we have found:
Address this age old problem today! Contact us for your nearest authorized distributor of Advanced Chemical Solutions: 440-463-3970 * dmb@brownesales.com
Advanced Chemical Solutions has formulated their multi spindle dual purpose oil to eliminate these issues. The use of our dual purpose oil as both lube oil and cutting oil assures excellent machinability while minimizing the likelihood of staining on the sensitive metals used in gear and hydraulic systems.
After extensive testing we have found:
- Tool life increased 40%, this is largely due to the cutting oil not being contaminated any longer by lube oil
- Reduced smoking, again lube oil tend to smoke when heated during the cutting process
- Reduction of fluids, same oil now for head stock and cutting
- Reduced misting of oil, we formulated with anti-mist additives
- Low odor, We use high grade base oils along with light color sulfur. (you don’t have to take the shop odor home anymore)
Address this age old problem today! Contact us for your nearest authorized distributor of Advanced Chemical Solutions: 440-463-3970 * dmb@brownesales.com
RSS Feed