440.285.8655
Browne & Co
  • Home
  • About
  • Cutting Tools
    • Carbro
    • CFT - George Whalley
    • Dapra
    • Dummel
    • Everede Tool
    • Fullerton Tool
    • Gaylee Saw
    • Lexington Cutter
    • Nine 9
    • Regal
    • Rockhard
    • Rocky Mountain Twist
  • Accessories
    • ACS - Advanced Chem
    • Alpha Tools
    • Boneham
    • Endurance Carbide
    • Haimer
    • MRO Solutions
    • Precision Brand
    • Safeway Sling
    • Tuffy Products
  • News
  • Contact
Boneham Metal Products Inc. was formed in 1972 quickly establishing a reputation for quality and reliability in the supply of high precision Inch drill bushings, Metric drill bushings, and dowel pins. BMP’s New Jersey premises maintain a large inventory of Boneham drill bushing products with representation and distributors throughout the United States. Our off the shelf service for standard drill bushings is enhanced by our ability to supply non-standardized specials in a variety of materials at competitive rates and short lead times. Non standard drill bushings, such as thin walled or bore / OD variants can be stocked to customer requirements.

Boneham Metal Products Inc.

327 N 14th Street
Kenilworth, NJ 07033
TF: 800.631.7852
Tel: 908.272.1200
Fax: 908.272.4124

TF Fax: 800.526.9494
sales@bonehamusa.com
Boneham Metal Products Drill Bushings
Precision Drill Bushings & Dowel Pins

Precision Drill Bushings

Picture
The Boneham Group has been manufacturing Drill Bushings for 100 years. Boneham Drill Bushings are manufactured to ANSI Standards. Additional sizes have been incorporated into the range over many decades of manufacture.

Drill bushings are highly accurate guides for drill bits and reamers. Drill bushings ensure the drill enters the work-piece square and with defined accuracy. Drill bushings also prevent drill wondering, chatter and drill breakage.

In a typical drill bushing setup, a jig is located and locked onto the workpiece to ensure repeatable positioning of the drill bushing and resultant drilled holes. Drill bushings lend themselves to not only drilling applications, but for location, alignment and rollers, due to their precision accuracy.

Metric Drill Bushings to US ANSI Standards. Large range of stocked sizes and specials manufactured to customer requirement.

Boneham Gun Drill Bushings are manufactured to strict tolerances and concentricity to provide complete accuracy during gun drilling operations.
  • P Type ANSI Headless Bushings
  • PM Type ANSI Metric Bushings
  • PTW Type ANSI Thin Wall Bushings
  • H Type ANSI Head Bushings
  • HM Type ANSI Metric Bushings
  • HTW Type ANSI Thin Wall Bushings
  • SF Type ANSI Combination Bushings
  • SF-TW Type ANSI Combination Bushings
  • SFM Type ANSI Combination Bushings
  • L Type ANSI Liner Bushings
  • L-TW ANSI Thin Wall Bushings
  • HL Type ANSI Head Liner Bushings
  • U-Lock Liner Bushings
  • SP Type Serrated Press Bushings
  • SPM Type Serrated Press Bushings
  • DG Type Diamond Groove Bushings
  • DGM Type Diamond Groove Bushings
  • Lock Screws and Clamps
  • ISO and DIN Standard Drill Bushings
  • PM Type ANSI Metric Bushing
  • HM Type ANSI Metric Bushing
  • SFM Type ANSI Metric Bushing
  • DGM Type Diamond Metric Bushing
  • SPM Type Serrated Metric Bushing
  • GDE Type - One Piece Gun Drill Bushing
  • GDI Type - Gun Drill Bushing Insert
  • GDL Type Gun Drill Bushing Liner

Dowel Pins

Boneham Inch Metric Dowle Pin
Engineers precision steel dowel pins are hardened and ground parallel pins. Boneham dowel pins are engineered to tight tolerance limits. Dowel pins are essential for accurate locating and alignment, in drilled and reamed holes. Boneham Metal Products offer a complete range of hardened steel and stainless steel dowel pins, both plain and pull dowels (internally threaded), in either inch or metric standard sizes. Special pins to drawing can also be quoted and manufactured to most customer requirements. Boneham also manufacture a pull dowel pin extractor tool in metric sizes M3 – M10 and also to BSW, BSF, UNC, and UNF. All drawings for these items are available in our catalog. If you require CAD drawings please email the sales team.
  • ANSI Inch Dowels ASME 18.8.2-2000
  • Inch Pull Dowel Pins
  • Metric to ASME 18.8. 100m-2000
  • Metric to ISO 8734 and DIN 6325
  • Metric to ISO 8735 and DIN 7979
  • Pull Dowel Extractor Tool
  • Air Release Flats
  • Pull Dowel Pins
  • 316 and 300 Series Stainless
  • Pull Dowel Extractor Tool
  • Extractor Heads
  • Dowel Pin Extractor Kit
Drill Bushings, Headless Press Fit Drill Bushing, Headed Drill Bushings, Renewable Drill Bushings, Knurled Drill Bushings, Handle Bushings, Metric Drill Bushings, Alignment Pins, Location Pins, DIN ISO Drill Bushings, Gun Drill Bushings, Dowel Pins, ANSI Dowel Pins, Pull Dowel Pins, Dowel Pin Tools, Clevis Pins
Browne & Co., Inc.
9605 Tanager Drive
Chardon, Ohio 44024
Phone 440.285.8655
Fax 440.285.8653
dmb@brownesales.com
© 2023 Browne & Co., Inc. All Rights Reserved
web design by Rapid Production Marketing