ARNO-Werkzeuge USA LLC
How do you increase spindle up-time on your sliding head Swiss lathe?
- Reduce tool change times from 7 minutes or more per tool to less than a minute. ARNO’s split shank tool holders allow you to quickly and accurately change tools and get your spindle going again without re-qualifying the zero point.
- Dismount the tool holder with an easy half turn of the self-releasing wedge clamps. Presently you’re probably spending a lot of time freeing your tool holders from wedge clamps that bind and need coaxed out of position with a mallet or a screw driver. ARNO’s tool change is 100% hassle free so you can get back to dropping parts on the conveyor.
- Increase tool life with powerful accurate through the tool coolant. The ARNO FAST CHANGE tools can deliver coolant directly to the cutting edge without the need for external coolant lines or spigots that constantly need adjusting.
- Eliminate bulky high-pressure lines and coolant tubes that occlude your already cramped machining environment. The ARNO FAST CHANGE gang plate is plumbed internally, like a manifold, so there are no external coolant lines. Your machinist will spend less time cleaning dripping oil and chips and more time closing the door and pressing the cycle start button.
- Carbro USA
- Endurance Carbide
- Inova Tools
- Precision Punch
Everede Tool Co.
Catalog includes Steel, Carbide, Carbide Bars andmore
Exclusive USA representative for Nine9 and Duemmel.
Nine9 manufacturer’s high quality unique indexable Engraving, Spotting...
Duemmel manufacturer’s high quality Indexable carbide cutting tools for micro boring, grooving