440.285.8655
Browne & Co
  • Home
  • About
  • Cutting Tools
    • Arno USA
    • Carbro
    • CFT - George Whalley
    • Dummel
    • Everede Tool
    • Fullerton Tool
    • Gaylee Saw
    • Lexington Cutter
    • Nine 9
    • Regal
    • Rockhard
    • Rocky Mountain Twist
  • Accessories
    • ACS - Advanced Chem
    • Alpha Tools
    • Boneham
    • Endurance Carbide
    • Haimer
    • MRO Solutions
    • Precision Brand
    • Safeway Sling
    • Tuffy Products
  • News
  • Contact

GS Shrink Fit Tooling with Coolant Ports

12/21/2020

0 Comments

 
No RunOut: As a result of Shrink Fit toolholders have no moving parts they offer the greatest repeatability of any tool holding system on the market.
GS SHRINK FIT TOOLING with COOLANT PORTS
GS from Sowa Tool introduces their new shrink fit tooling with coolant ports
Features and Benefits:
  • Unsurpassed Accuracy: Concentricity of <0.0001" (3um) with tool shrunk in holder
  • Coolant Ports: Each holder has 4 coolant ports in the nose to ensure coolant gets right to the tool
  • Max Gripping Torque: Tool is gripped 360° along the entire length of bore producing very high gripping torque, preventing chatter.
  • Balanced: GS follows the strictest balance standards. Holders are pre-balanced to G2.5 at 30,000RPM.
  • Material: HSS-H13
  • Chip load distributed evenly along cutting edge of tool which results in longer tool life
  • Short projections are possible because no mechanical clamping devices are used. This results in greater rigidity and resistance to bending 
0 Comments

Sowa GS Holders - 100% Forged Quality

12/1/2020

0 Comments

 
Picture
Sowa GS holders are all forged and traverse ground throughout. Our ER collet chucks are certified balanced up to 30,000 RPM with the nut on the holder. TIR 0.0003" at 4X diameter and DIN coolant through the flange is standard. Contact us today for your nearest authorized Sowa Tool distributor.
Picture
Download Catalog
0 Comments

New Sowa GS-ADX-160G 6" Precision Milling Machine Vise!

10/5/2020

1 Comment

 
Picture
Picture
Picture
  • Jaw opening increased from 8.8" to 9.13"
  • Narrower body style to allow more vises on a machine table
  • The bearing pack has been relocated to help reduce oil/coolant/chip leakage into the vise body
  • Thrust bearings replaced with ball bearings to make the pack stronger and more stable
  • Spherical segment creates all-directional alignment and reduces jaw lift
  • New brush seal design
  • Perpendicularity (running face and jaw plate) 0.0004"
  • Parallelism (running face to bottom of bed) 0.0006"
  • FCD-60 material (80,000 psi)
  • New stationary jaw: 4 bolt stationary design reduces lift
  • Pull-Type design: Reduces stress on body during clamping
  • Chip evacuation: Straight through the body on sides and ends - Location strategically chosen to not reduce body strength

Code# 327320
Regualr Price: $589.50
​
$475.00
Download Complete Vise Sale Promotion
Please contact Browne & Comapny for closest authorized Sowa GS distributor
Picture
1 Comment

Jeff Terrace joins the Browne & Co Team!

6/11/2020

0 Comments

 
In January of this year we welcomed a new member to our Browne & Co. sales team and with manufacturing companies opening up again, it's about time we introduce you to Jeff Terrace!

Jeff graduated from Ohio University with a Bachelor of Science in Mechanical Engineering in 2008.  He started his professional career at Lincoln Electric in Euclid, OH as a process & project engineer in the machining and mechanical parts group.  He was tasked with new product development for all the machined parts in the plant as well as new equipment implementation and process improvement.

After Lincoln Electric, Jeff joined the application engineering team at Ingersoll Cutting Tools in both the general marketplace and Automotive division.  The majority of his time at Ingersoll was spent working with local manufacturing companies as well as the Big Three automakers on custom tooling applications  for high and low volume production, custom carbide, CBN and PCD tooling.
Jeff Terrace Browne & Co Manufacturers Agent Rep
Jeff Terrace joined our Browne & Co team in January 2020
Jeff Terrace
cell: 216-556-3344
Jeff@Brownesales.com

Just before joining Browne & Co in January 2019, Jeff worked at Hoffmann Group, a German cutting tool, hand tool, workstation and storage solutions manufacturer.

Jeff has been working as an InovaTool representative since February of 2019 and recently joined Browne & Company at the beginning of 2020 as our Cutting Tool Specialist. Please send Jeff and email or give him a call to introduce yourself or pick his brain about an application question.
0 Comments

Sowa Tool Opens New North Carolina Distribution Center

6/2/2020

0 Comments

 
Sowa Tool distribution center Mooresville NC USA.png
Sowa Tool has relocated its current US based distribution center in Maumee, Ohio to a newer, 40% larger facility in Mooresville, North Carolina.

This move will provide better 1-2 day coverage to their rapidly growing customer base in the south-east United States while maintaining our 2 day coverage across the entire north-east and mid-west.

This inventory transition took place towards the end of the 2019 calendar year. The new facility is now fully online and ready to serve our US customers.

0 Comments

Sowa Tool's Winter Sales Promotion has been extended to June 30th!

5/7/2020

0 Comments

 
Picture
Sowa Tool is open and their stock levels have never been stronger!

Sowa the most comprehensive offering of metalworking supplies in the industry. "Sowa for Quality and Service" has been the backbone of the company since 1960.

Their brand NEW, 10,000 square foot, Mooresville, North Carolina Distribution Center is now fully on-line and ready to serve machine shops from this central shipping hub in the US.

Sowa Tool's Winter Sales Promotion has been extended to June 30th!

Take advantage of  Sowa's incredible SALE pricing, for quality metalworking tooling & workholding.

Here's a look at some of the promotions!

  • GS-ADX-160G  6” vise with a 9” opening  $442.13 with Promo Code: 327-320
  • ER Collet Chucks:  45% off Regular Price!
  • CAT40/50 Milling Chucks: 45% off Regular Price!
  • CAT40/50 TG Collet Chucks: 45% off Regular Price!
  • CAT Taper Integral Shank Keyless Drill Chucks
  • BT Taper Integral Shank Keyless Drill Chucks
  • HSS TiAIN Tip Jobber Length Drill Set
  • Black/Gold Jobber Length Drill Set
  • Bench Vises With Swivel

Call or Contact Browne & Co. for your closest, authorized Sowa Tool distributor.

0 Comments

Sowa GS Multi-Tasking Modular Vises GFor 5th Axis Machining Centers

2/19/2020

0 Comments

 
Picture
​
The Sowa GS multi-tasking range of vises has been specially designed for 5-axis machines. Working on 5 sides of the workpiece, it allows the best optimization of the machining cycle. Thanks to the compact design this kind of vise can be installed on all machining centers.

These vises have the highest accuracy in positioning and alignment (± 0.02mm) due to ground rack teeth on both the base and the fixed jaws.

Call or email for closest authorized Sowa distributor
440-463-3970
​dmb@brownesales.com

Download Flyer
0 Comments

Sowa's Opens New Distribution Center in Mooresville, NC.

2/12/2020

0 Comments

 
Picture
Featured in this Sowa Tool Promo:
  • Incredible pricing on a variety of the most popular GS collet chucks
  • The all new GS ADX 160 vise, comparable to the Kurt DX6
  • Noga brand deburring kits and tools
  • Asimeto precision tool overstock
  • And much more of your popular tooling requirements!

Call or email for your nearest authorized Sowa distributor
440-463-3970
dmb@brownesales.com
Download for savings!
0 Comments

GS High Performance Live Center Promotion!

2/3/2020

1 Comment

 
Picture
As a leading manufacturer of high quality Rotary Tooling and Machine Vises GS Tooling is known for providing the best quality to our customers. Each GS Live Center is of the highest quality and manufactured to the industry’s tightest specifications. All this and still priced 40-50% below the leading brand names.
  • Each GS Live Center uses either a 3, 4, or the incredible 5-bearing system. Each bearing system has been individually and specifically designed for the applications in which that live center is meant to be used. This specificity of design provides superior performance and tool life across the entire GS line of centers.
  • An additional special coating process is applied to the lip seal contact area. This coating offers a higher sealing ability and reduces rotational friction, both contributing to longer tool life.
  • If roller bearings are used at high temperatures, the hardness of the bearing steel decreases. Consequently the basic load rating, which depends on the physical properties of the material, also decreases. GS Live Centers are designed to prevent excessive heat. Live center temperatures are controlled even when rotating at maximum RPM.
  • Every single center has passed at least 4 different accuracy tests to ensure our customers the highest quality available in the market today.
Download Promotion
Call or email for your closest authorized Sowa dealer
440-463-3970
​dmb@brownesales.com
1 Comment

GS Tooling 6" Single Station CNC Vise Sale!

8/4/2019

0 Comments

 
Picture
New Product !
​
This high accuracy vise has been specially designed to prevent workpiece lift and is ideally suited for single station vise applications in CNC machining centers.

On Vertical Machine Centers it has 2 operating positions: Upright & Lay Down.

On Horizontal Machine Centers it has one operating position: Horizontal.

Only $837 while supplies last

Please call for your nearest authorized Sowa distributor (440) 463-3970
Download Flyer
0 Comments
<<Previous

    Author

    We've compiled the latest news and technical information about our principals and our market that we hope you find informative!

    Archives

    May 2022
    April 2022
    March 2022
    February 2022
    January 2022
    December 2021
    November 2021
    October 2021
    September 2021
    August 2021
    July 2021
    June 2021
    May 2021
    April 2021
    March 2021
    February 2021
    January 2021
    December 2020
    November 2020
    October 2020
    September 2020
    August 2020
    July 2020
    June 2020
    May 2020
    April 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    October 2019
    September 2019
    August 2019
    July 2019
    June 2019
    May 2019
    April 2019
    March 2019
    February 2019
    January 2019
    December 2018
    November 2018
    October 2018
    September 2018
    August 2018
    July 2018
    June 2018
    May 2018
    April 2018
    February 2018
    January 2018
    November 2017
    October 2017
    September 2017
    August 2017
    July 2017
    May 2017
    March 2017
    February 2017
    January 2017
    December 2016
    November 2016
    October 2016
    September 2016
    July 2016
    June 2016
    May 2016
    April 2016
    March 2016
    February 2016
    January 2016
    June 2015
    April 2015
    March 2015
    February 2015
    January 2015
    December 2014
    October 2014
    September 2014
    August 2014
    July 2014
    June 2014
    May 2014
    April 2014
    March 2014
    February 2014
    January 2014
    December 2013
    October 2013
    September 2013
    April 2013
    February 2013
    September 2012
    February 2012
    October 2011
    July 2011
    April 2011
    January 2011
    November 2010
    October 2010
    August 2010
    April 2010
    February 2010
    July 2009
    January 2009
    July 2007

    Categories

    All
    Abrasives
    Advanced Chemical Solutions
    Aerospace
    AirLoc
    Allen Benjamin
    Alpha Tool
    AlumaMill
    Arno USA
    Asimeto
    Award
    Back Chamfer
    Beveling Base Starter Kit
    Bishop Lifting Products
    Boneham
    Boring
    Boring Bars
    Brian Martin
    Browne & Co.
    Carbide Cutting Tools
    Carbide Drills
    CAT40
    CAT50
    Catalog Download
    Chamfer
    Chip Thinning
    Circular Saws
    Clamping
    Coating
    Coolant
    Coronovirus
    Countersinks
    Custom Tooling
    Cutting Tools
    Deburring
    Deep Hole Drilling
    Drill Bushing
    Drilling
    Drills
    Dummel
    Dümmel
    End Mill
    Endurance Carbide
    ER Colllet
    ERGO
    Everede
    Everede Tool
    Fantom
    Feeler Gage
    Flap Wheels
    Forged Wheels
    Fullerton Tool
    Fury
    Gage Reconditioning
    Gaylee Saws
    Gemtex
    George Whalley
    Grooving
    GWS Tool Group
    Haimer USA
    Harmon-i-Cut
    HB Rouse
    HSK
    H Tolerance
    Hydromat
    IBC
    IMTS
    Industrial Supply Assoc
    InovaTool
    Inserts - Boring
    Inserts - Grooving
    Inserts - Parting
    Inserts- Turning
    Intimidator
    ISA Industrial Supply Assoc
    ISO-9001
    Jergens
    Lexington Cutter
    Live Center
    Lubricants
    Machining Cloud
    Made In USA
    Manufacturing
    Martindale Saws
    Mastercam
    Material: Aluminum
    Material: Inconel
    Material: Titanium
    Measuring Tools
    Memorial Day
    Metalworking
    Metalworking Fluid
    Metrology
    Mill Turn
    Minimill
    MRO
    Multifunctional Tool
    Nanotech 7000
    NASA
    NATC
    NC Helix Drill
    Nine9
    North American Tool
    Ohio
    Peel Milling
    PMTS
    Polisher
    Precision Brand
    Promotions
    Punches
    Reamers
    Regal
    Rep Of The Year
    RMT Rocky Mountain Twist
    Rouse - Arno
    Safeway Sling
    Sales
    Sales Tools
    Saw
    Screw Threads
    Shim Stock
    Shrink FIt
    Sling Inspection
    Sling Safety
    Slip Plate
    Sowa
    Spade Drills
    Special Cutting Tools
    Special Tools
    S&R Products
    Stonecutter
    Swiss Machining
    Tap: Carbide
    Tap: Carbide Insert
    Tap Chamfer
    Tap Definitions
    Tap: Metric
    Tapping
    Taps
    Tap: STI
    Tap: Thread Forming
    Technical Support
    Thread Gaging
    Threading
    ThreadMills
    Thread Tap App
    TIMill
    Tire Mold
    Tool Balancing
    Tool Black
    Toolholders
    Tool Presetter
    Tool Selection
    Tool Wrap
    Trochoidal Milling
    Troubleshooting
    Tuffy Products
    Turning Tools
    Valspar
    Vibration Pads
    Vises
    Weldon Flat
    Workholding

    RSS Feed

Browne & Co., Inc.
9605 Tanager Drive
Chardon, Ohio 44024
Phone 440.285.8655
Fax 440.285.8653
dmb@brownesales.com
© 2022 Browne & Co., Inc. All Rights Reserved
web design by Rapid Production Marketing