440.285.8655
Browne & Co
  • Home
  • About
  • Cutting Tools
    • Carbro
    • CFT - George Whalley
    • Dapra
    • Dummel
    • Everede Tool
    • Fullerton Tool
    • Gaylee Saw
    • Lexington Cutter
    • Nine 9
    • Regal
    • Rockhard
    • Rocky Mountain Twist
  • Accessories
    • ACS - Advanced Chem
    • Alpha Tools
    • Boneham
    • Endurance Carbide
    • Haimer
    • MRO Solutions
    • Precision Brand
    • Safeway Sling
    • Tuffy Products
  • News
  • Contact

Rockhard Tool Inc

Rockhard Tool Inc.
7915 Kensington Avenue
Brighton, MI 48116
TF: 800:251.5241
Tel: 248.446.0800
Fax: 248.446.0900
orders@rockhardtoolsinc.com

Rockhard Roto Percussion Straight Shank Bit
Construction Cutting Tools

SDS PLUS HAMMER DRILL BITS

SDS Plus Hammer Drill bit carbide tip
Faster Drilling from Chisel Shaped Head and new aggressive Carbide Tipwhich features:
  • Self centering for precise starts.
  • 150 degree angle for optimum elasticity and wear resistance resulting in longer life.
  • Made in Germany
  • Made to ANSI Specs

SDS Plus Hammer Drill Square Flute masonary Bit
Longer Life from:
Bronze alloy brazing of the carbide tip.
High quality, shot-peened, steel strengthened to relieve tension and bit breakage.
New wide fluting design flows the dust out of the hole faster thus reducing friction and adding life to the w cutting


Rockhard Extruded Anchors

Extruded Anchor Installation 1
Step 1: Drill hole with correct diameter & depth
Extruded Anchor Installation 2
Step 2: Blow hole clean of dust & material. Insert the anchor in the hole until it is flush with the surface of the base material
Extruded Anchor Installation 3
Step 3: Position the fixture. Insert the proper size screw through the fixture into the top of the anchor & tighten. Be sure the thread is fully engages the anchor body.
Picture
  • Made from PVC.
  • Expansion on the total surface and length of anchor.
  • Three external fins prevent rotation.
  • Profile ensures self-centering of the screw.
  • High tensile loads in concrete and solid brick.
  • Anchor protects the screw against
  • Available in 8 diameters
  • Not Tapered - Ensure better contact.
  • No Lip - Fixture mounts fl ush with surface.
  • No fraying or splitting - Self Centering

  • Usable in all drillable materials.
  • Fills cavities inside drill hole.
  • Coverage: #4 Screw through 1/2” Lag.
  • No Lubricant needed
  • Self lubricating PVC
  • Requires smaller holes than metal anchor
  • Cuts to special length
  • Acid Resistant
  • Does not turn in hole



Browne & Co., Inc.
9605 Tanager Drive
Chardon, Ohio 44024
Phone 440.285.8655
Fax 440.285.8653
dmb@brownesales.com
© 2023 Browne & Co., Inc. All Rights Reserved
web design by Rapid Production Marketing