440.285.8655
Browne & Co
  • Home
  • About
  • Cutting Tools
    • Carbro
    • CFT - George Whalley
    • Dapra
    • Dummel
    • Everede Tool
    • Fullerton Tool
    • Gaylee Saw
    • Lexington Cutter
    • Nine 9
    • Regal
    • Rockhard
    • Rocky Mountain Twist
  • Accessories
    • ACS - Advanced Chem
    • Alpha Tools
    • Boneham
    • Endurance Carbide
    • Haimer
    • MRO Solutions
    • Precision Brand
    • Safeway Sling
    • Tuffy Products
  • News
  • Contact
Carbro manufactures high-quality solid carbide Burrs, Drills, Reamers, Routers, and Threaded Shank Tooling.  Carbro has built a strong reputation over the past 50 years in manufacturing top quality tooling that meets industry needs and specifications.  The Carbro team is always ready to work with our customers and any possible special requirements they may have.

Carbro

15724 Condon Ave
Lawndale, CA 90260
TF: 888.738.4400
Tel: 310.643.8400

CARBRO was established in 1968, is a market leader manufacturer of high quality, precision tungsten carbide cutting tools with a niche focus on the Aerospace Industry. We have a clear vision - “Be Exceptional”, with a mission statement to be “Flight Ready for the Future”.
Carbro Burrs Drills Reamers Routers
Carbide Burrs, Drills, Reamers & Routers

Drill Reamers

Drill Reamers
HIGH PERFORMANCE TAPERED DRILL/REAMER
This tool can be used for hand drilling, robot or CNC. Originally developed for drilling fiberglass, these drills are also excellent for CFRP, CFRP/Nomex, GFRP/Nomex, CFRP/ Al, Al/Al, Carbon/Carbon, and graphite.
​
  • Solid carbide provides rigidity and reduces runout over high speed steel.
  • Elongated double-angle geometry eliminates thrust and exit side delamination.
  • Bright polished finishes provide superior edge quality and optimum surface chip flow. • Straight Shanks are used in general purpose applications, Threaded Shanks available
  • on request.
  • Optional Diamond and DLC coatings to address the specific demands of your application, as needed.

TOLERANCE: CUTTERDIAMETER: +.0005” -.0”

Dagger Drills

Threaded Dagger Drills
AN EXCELLENT TOOL FOR DRILLING GRAPHITE/EPOXY LAMINATES. 

The dagger drill has proven to be the best drill for drilling is carbon fiber composite aluminum, fiberglass and reinforced plastics because of its ability to reduce delamination and at the same time produce a precise hole.

​
Can be used in combination with aluminum.
No back up required. Feeds and speeds recommendations available.

TOLERANCE: CUTTERDIAMETER: +.0”
-.0005”

Nut Plate Drills

Nutplate Drills
USED IN COMBINATION WITH A NUT PLATE DRILL MOTOR.

Nut plate drill countersinks are so named because they are used in nutplate pneumatic drill motors. These portable units incorporate nut plate drill jigs and the nutplate drill to drill consistent, properly drilled and counter sunk holes.
​

​Available drill sizes are No. 30 & No. 40 with either 3/16 or 1/4 body diameters and external threaded shanks.

P3 135° Split Point available upon request. 

TOLERANCE:
DRILL DIAMETER +.0 -.0003

Browne & Co., Inc.
9605 Tanager Drive
Chardon, Ohio 44024
Phone 440.285.8655
Fax 440.285.8653
dmb@brownesales.com
© 2023 Browne & Co., Inc. All Rights Reserved
web design by Rapid Production Marketing