|
Edited by Bernard Martin Often times in a shop, a saw arbor is a saw arbor is a saw arbor. That's just not the case and Martindale Gaylee offers several solutions. They have variants to saw arbors to meet your specific needs whether it be in a CNC milling machine, a CNC Lathe, a manual mill or even a Swiss Style CNC machine. This includes:
Let's take a look at the differences below. TI-LOC® Saw Arbors with integrated ER taper
The Ti-Loc® SwissClamp System is a taper-integrated small tooling system is designed to work with virtually any collet or tool holder that employs the ER collet system (DIN6499). The Ti-Loc directly mounts into ANY ER Taper Live or Static Tool Position. The Ti-Loc® System works with any existing tool holder and most all ER collet clamping nuts. Simply insert the Ti-Loc holder into any ER nut and twist to align the locking cam profile jus was you would for any ER collet. The Ti-Loc® SwissClamp System can be used in any machine that has ER collet live tooling. It comes standard with ER 11, ER16 and ER20 taper arbors that serve as their own collet, eliminating need for two-piece arbor system. This single piece design adds rigidity of set-up and improves total indicated runout (TIR). In fact, it reduces tolerance “stacking” to an incredibly low TIR of less than 0.0002". To top it off, it's less expensive & more cost effective than most comparable two-piece arbor systems. A recommended maximum saw thickness is approximately 0.080” Gold Star Precision Series Saw Arbors Gold Series reach saw arbors Martindale Gaylee also offers a Gold Series reach arbor. These arbors are heat treated and ground to 0.0004” T.I.R. concentricity and squareness. The Gold Series are engineered for use with carbide saws and where accuracy is a must. This VIBRA-CORE design, along with the deep low profile caps, gives extra support and less vibration. General Purpose Series Saw Arbors General purpose slitting slotting saw arbor Martindale Gaylee's general purpose slitting/slotting saw arbors are all ardened all over (58/60 Rc) for added toughness on cutter locating surfaces and shanks. The General Purpose Series Saw Arbors shanks ground to within 0.001" T.I.R. of cutter location diameter. They have an extra long, strong body with a protective black oxide finish. The super low profile on caps allows the cutter to reach areas inaccessible with conventional arbors. Stout plug: extra support, less vibration sum up the benefits of this style. Oh, and Weldon style shanks are readily available. Custom Saw Arbors An example of a Custom Saw Arbor Can be made extra-long for reach beyond or inside part features
 You can spec your own custom saw arbor
0 Comments
AFC tool holders: the revolution in fast tool changes – patent applied  The ARNO FAST CHANGE system is a complete quick change solution for your Swiss machine. It consists of a through coolant gang plate that acts like a manifold, so all of the coolant is delivered behind the scenes. It's your solution for easy tool changes despite limited space in Swiss type machines: The two-part AFC holder – even untrained staff can replace tools fast and reliably. This is how it works: The rear part of the tool holder (AHA fixed stop) is first fixed in place. Only the front part is removed to replace the tool. This eliminates the need to restart and recalibrate the zero point since the length to the insert tip is always the same – whether the grooving system or the turning system is used.
The through coolant split shank tools will reduce your tool swap time to a minute or less. This is an innovative system that is engineered and manufactured in Germany solely to keep your spindles running and dropping more finished parts per shift. As of right now we have 51 gang plates in stock for: Citizen, STAR, Hanwha, Tsugami, KSI Swiss, DMG Mori, Nexturn and Tornos. To learn more, click the button below:
|
AuthorWe've compiled the latest news and technical information about our principals and our market that we hope you find informative! Archives
November 2024
Categories
All
|
RSS Feed
|
Browne & Co., Inc.
9605 Tanager Drive Chardon, Ohio 44024 |
© 2024 Browne & Co., Inc. All Rights Reserved
web design by Rapid Production Marketing |