Features and Benefits:
- Unsurpassed Accuracy: Concentricity of <0.0001" (3um) with tool shrunk in holder
- Coolant Ports: Each holder has 4 coolant ports in the nose to ensure coolant gets right to the tool
- Max Gripping Torque: Tool is gripped 360° along the entire length of bore producing very high gripping torque, preventing chatter.
- Balanced: GS follows the strictest balance standards. Holders are pre-balanced to G2.5 at 30,000RPM.
- Material: HSS-H13
- Chip load distributed evenly along cutting edge of tool which results in longer tool life
- Short projections are possible because no mechanical clamping devices are used. This results in greater rigidity and resistance to bending